Cell Culture Flasks
Sino Biological T175 Cell culture flask- Vent cap (Purple) - TC treated (Sterile)
T175 Cell culture flask- Vent cap (Purple) - TC treated (Sterile)
CELLTREAT Scientific Products 225cm2 Tissue Culture Flask - Vent Cap, Sterile
CELLTREAT Scientific Products 225cm¿ Tissue Culture Treated Flask. Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment. Convenient zip-closure bag is a practical alternative to folding and taping open bags. Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers. Stable base enables filling with flask standing upright. Thick, durable walls. Flask is printed with lot number and expiration date for easy identification and tracking. Vent cap and maximum volume of 700mL. RNase/DNase free and non-pyrogenic. Every case is printed with the lot number for quality traceability. Packaged sterile, 5/re-sealable bag, 25/case.
ENVIRONMENTAL SPECIALTIES LLC OPTION FACTRY ACCEPT TEST LVL2
NC3886731 OPTION FACTRY ACCEPT TEST LVL2
Ace Glass, Inc. Flask, trypsinizing, 150mL, baffled, with sidearm & neck screwcaps, cs/3
150mL trypsinizing flask for converting of homogenous tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep, extra long side baffles greatly enhance vigorous agitation.
Chemglass Life Sciences Spinner Flask, 50mL, Flat Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Chemglass Life Sciences Glass Shaft Only, 7mm, 3, 000mL Spinner Flasks
Replacement Components for CLS-1410- and CLS-1411-Series Spinner Flasks.The Replacement Shaft consists of the glass shaft only.
Bellco Glass, Inc. IOB w/ MicroCarrier Flask,500mL-70mm
Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. MADE IN THE USA. Cap size: 70mm Flask size: 500ml Dimensions: 110 x 180mm Sidearm cap: 45mm
Bellco Glass, Inc. Glass Ball Spinner Only,250mL No Ctr Cap
Description: Glass Ball Spinner Flask Only. MADE IN THE USASize: 250mLMaterial: Type 1 Class A Borosilicate GlassDimensions: 85mm OD x 140mm Overall Height, 164mm across sidearmsTwo 32mm Sidearms angled 55° offset center70mm Screw Thread Center NeckDimpled BottomGraduations: 50mL to 250mL, every 25mL – White Ink (Approx Volumes)Supply with: Two 32mm PP Blue Screw Caps & PP Blue Pouring Rings
Chemglass Life Sciences 250mL Internal Large Impeller Spinner Flask, Bioprocess, Complete
MicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Bellco Glass, Inc. Glass Ball Spinner Only,8000mL No Ctr Cap
Description: Glass Ball Spinner Flask Only. MADE IN THE USASize: 8000mLMaterial: Type 1 Class A Borosilicate GlassDimensions: 238mm OD x 420mm Overall Height, 270mm across sidearmsTwo 45mm Sidearms angled 30° offset center100mm Screw Thread Center NeckDimpled BottomGraduations: 500mL to 8000mL, every 500mL – White Ink (Approx Volumes)Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings
Bellco Glass, Inc. MicroCarrier Spinner complete,500mL,100mm Neck
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. Size: 500ml Center Cap:100mm Sidearm cap: 45mm OD X OAH:110 X 180
Chemglass Life Sciences Spinner Flask Only, 1000mL, Jacketed, BioProcess, Plain Bottom
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Chemglass Life Sciences BioProcess Spinner Flask, 250mL, Dimpled Bottom, Complete
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle.Please Note: The 6L and 8L Versions Do Not Have Dimpled Bottoms.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.